The motor of four times is a motor that transforms the chemical energy of a fuel into calorific energy, that provides the mechanical energy as well necessary to move vehículo….
Virgin Adriana Lima, interesting Tricks of GUITAR HERO for Playstation 2, Curiosities, the friends of Bush, a knot in the savannah
Definition and classification of motors
By motor all machine is understood that transforms into work any type of energy.
The motor of the used automobile today can say that it transforms the stored chemical energy into a fuel, or the stored electrical energy, in storage cells, mechanical energy.
TROUBLESHOOTING AND MAINTENANCE OF ELECTRICAL AND MECHANICAL CAR
Triangle breakdowns
Periodic reviews by the driver
1. Clean the vehicle.
2. Change oil filter.
3. Level of engine oil. Change filter.
4. Check cooling sleeves.
5. Level change and coolant.
6. Voltage strap generator, water pump.
7. Battery. Level electrólito.Conexiones
8. Power. Checking spark plugs and cables.
9. Deposit of washer systems.
10. Deposit of lavalunetas.
11. Check connections generator.
12. Check connections engine starts.
13. Level hydraulic clutch.
14. Level of the power steering fluid.
15. Jets of lavafaros.
16. Adjusting the suppliers of washer systems.
17. Checking the status of the brushes of wipers.
18. Check brake pedal travel. Pills.
19. Check trail parking brake.
20. Check tour clutch.
21. Level of change.
22. Level of the brake fluid reservoir.
23. Pressure tires.
24. Grease.
25. Grease hinged door locks.
26. Conservation tools and equipment.
27. Documentation of the vehicle.
The revisions indicated in the service book, were virtually referenced in this relationship while others relate to be carried out in workshops recommended as trademarks.
Revisions levels, fluids and other elements of the vehicle
Differences between the injection and carburisation
In gasoline engines, the mixture is prepared using a carburetor or injection equipment. So far, the carburetor was the most common mixture preparation, mechanical.
dvantages of the injection
Consumer reduced
With the use of carburetors, intake manifolds in the mixtures are produced uneven air / gasoline for each cylinder. The need to form a mixture that even enough to feed cylinder compels most disadvantaged, in general, a quantity of fuel dispensed too high.