Cars and Tuning

dvantages of the injection
Consumer reduced
With the use of carburetors, intake manifolds in the mixtures are produced uneven air / gasoline for each cylinder. The need to form a mixture that even enough to feed cylinder compels most disadvantaged, in general, a quantity of fuel dispensed too high.

The result is an excessive fuel consumption and an unequal burden of cylinders. By assigning an injector for each cylinder, at the right time and at any stage of loading makes sure the amount of fuel exactly balanced.
Increased power
The use of injection systems allows optimizing the shape of the intake manifolds and thus better llanado of cylinders. The result translates into a higher power and an increase in the specified torque.
Exhaust emissions cleaner
The concentration of pollutants in the exhaust gases depends on the proportion air / gasoline. To reduce the emission of pollutants is necessary to prepare a mixture of a certain proportion. The injection systems allow you to adjust at all times the required quantity of fuel respect to the amount of air entering the engine.

Starting in cold and warm phase
Through the exact dosage of fuel depending on the engine temperature and the system boot, boot times get shorter and safer and faster acceleration from idle. During the warming can set requirements for a march round of the engine and a good admission gas without jolts, both with a minimum of fuel consumption, which is achieved by adapting accurate flow from it.